Ventilation in the bath is easy to do with your own hands if you know its device and the scheme of the steam room. The position of the furnace depends on the installation of gaps, supply valves, vents, etc.

The industrial air aspiration system removes a dry suspension of the smallest particulate matter along with polluted air. This approach is most effective and economical.

An automatic ventilator for a greenhouse is easy to make with your own hands. We make systems of several tanks and a pneumatic version of the ventilator.

Ventilation in the cellar consists of a pair of ducts in different corners of the room. Air begins to circulate if one is installed on the floor and the other on the ceiling 50 cm from the floor.

Simple ventilation for a garage where vehicles are painted is not suitable. She simply will not be able to cope with the task that she is posed.

During construction, it is necessary to provide ventilation of the basement in the garage, otherwise moisture will condense. Humidity is the cause of mold, rot and odor.

The hood in the bath and steam room can do with dampers and grilles to adjust the air flow. However, the use of devices is not as difficult and costly as it seems.

A hood in the cellar of the garage is necessary and this is obvious. Condensation due to temperature differences during the cold season harms the storage of vegetables and other supplies.

The main condition for the good functioning of the gas column is the natural draft generated in the ventilation pipe. Therefore, it is often necessary to install an additional hood.

Properly made ventilation for the garage will save you from the hassle of using personal vehicles and will help to maintain its beautiful appearance for a long time.

Industrial emissions must be captured at close range from the source. It is not difficult to carry out the calculation if you know the formula and initial data.