How to make a ventilation system in a private house with your own hands
The ventilation system in a private house creates a favorable atmosphere for residents and ensures the safety of the entire structure. Therefore, the ventilation device of a private house must be given maximum attention.
Wooden house ventilation system
Wooden houses built according to old technologies are perfectly ventilated through the cracked gaps between the logs, window openings and door frames. The exhaust pipe here is a chimney. The greater the difference in temperature on the street and inside, the more efficient the ventilation scheme of the house works.
However, if the house was created using the latest technologies, there is practically no natural air exchange in it.Energy-saving techniques do not facilitate the flow of air from outside.
However, when building a wooden house, it is recommended to organize just the natural ventilation scheme of the house.
If you provide a ventilation system for a private house during the design process, ventilation ducts can be hidden inside the walls. The main exhaust channel with this scheme should be displayed as high as possible above the roof level. The greater the elevation difference, the stronger the thrust.
The cross section of all channels should be the same, and the walls should be smooth. So there is no place to linger dust and provides equal traction.
Frame house ventilation system
Ventilation in frame and wooden houses is very different. The technology of building a frame house ensures its complete isolation from the outside. That is, not a gram of air can get into the house.
It will not be possible to arrange ventilation of a private house in a natural way, since the method is good for large elevations. Therefore, forced ventilation is installed.
Before you make ventilation in the house with your own hands, you need to calculate the intensity of the air flow. Depending on it, equipment is purchased. The supply and exhaust ventilation systems of frame and wooden houses are quite complex. Therefore, their installation is usually done by professionals.
But we will give simple advice on how to make ventilation in the house with our own hands. The air supply is provided by valves that are mounted directly to the walls. The number of valves depends on the area of each room. Outflow is made by a system of fans. From bedrooms, cabinets and living rooms, air should be drawn into corridors, kitchens, toilets and walk-in closets. And from here already through the attic to the street. Plastic ducts are used, and fans can be taken the simplest, sold in plumbing stores.