We create ventilation in the toilet in the country
Let's talk about the significant moments of the correct country toilet, the most important thing in which is the most effective ventilation. A toilet in a private house, as you know, is not a luxury, but a direct necessity. During the construction of the toilet on your site outside the city, do not miss the moment when you need to make ventilation of the cesspool and the toilet cabin itself. However, if you still forgot about it, this oversight can be corrected if you make several holes yourself, providing at least minimal ventilation to the country toilet.
Country toilet: ventilation in the pit
In a house with an autonomous sewage system, as a rule, ventilation of the cesspool and ventilation of the septic tank should be arranged. Moreover, the ventilation pipe should be inserted into the drive so that its lower end is 20-30 cm above the level of its filling. If the issue of ventilation of the pit is resolved, an unpleasant odor can still accumulate in the cabin due to the fact that the room is not tight, the lid closes loosely or for other reasons. This often happens if the toilet is built unprofessionally. To get rid of the bad smell, there is a backup ventilation option made directly in the toilet cabin.
Country toilet: ventilation in the cabin
Ventilation of the toilet in the country will require sewer pipes made of plastic about three meters long and 110 mm in diameter, a connecting angle of 90 degrees, an umbrella from rainfall, a ventilation grill and clamps.A hole in the toilet wall of a sufficiently large diameter (120-130 mm) is drilled with a metal detachable crown, then a place for drawing is marked in the upper part of the cabin, the crown is attached to the drills and the second hole is drilled.
Pipes should be connected by a transitional corner. The design is inserted into the hole, and all excess from a short piece of pipe is cut off. Next, the assembled design of the ventilation of the toilet in the country is mounted on the wall with connecting clamps, an umbrella is put on that protects against rain. You can control the vertical of the resulting ventilation system for the country toilet using the building level. To complete the work, two self-tapping screws are screwed to install the ventilation grille indoors. If there is such a problem as the gap between the pipe and the wall, then fill it with mounting foam or cover with sealant.
