We do the heating in the house with our own hands - today it is not uncommon. To install the system you only need to stock up on knowledge from the Internet and accessories available in any store.
Choosing a home heating scheme
The question of what kind of heating we do in the house is very important and fundamental, since each scheme has its pros and cons. A private house can be heated using the following types of coolant:
- water;
- steam;
- open fire;
- electricity;
- air.
Before you make heating in the house, you should decide what kind of coolant the house will be heated. It’s better to choose the system that is the easiest to provide energy, more economical. Many experts recommend installing a backup for the main heating system. For example, we do heating in a private house on the water, installing the main system on the water, and the additional on wood and coal. In the event of a power outage, a solid fuel boiler will save.
Correct calculations of the heating system alone can only be done by a specialist. Therefore, at this stage, you will have to order a project at a bureau or from a private private owner, he will also advise how to make heating in the house. Then you can go to the store for the boiler and accessories.
DIY heating
The first stage is the installation of the boiler. If we make heating in the house on any type of boiler equipment with the exception of electric, it is necessary to organize a boiler room. This is a small room in the basement where there is ventilation. The walls and floor of the room must be fireproof.
The chimney is mounted. Next, a pump and a collector are installed (if they are in the circuit), as well as all the necessary sensors.
The next step is laying the heat pipe and installing the batteries, which is the last one. For batteries, brackets are attached to the walls, certainly under the windows, since they are the main sources of cold in the room. The gap from the windowsill and floor is 10 centimeters, from the wall 5 centimeters. On each battery, a tap for releasing air and water, sometimes thermal sensors, is mounted.
Pressure testing and heating start
These stages are final in the process of doing the heating in the house with our own hands. To start the boiler in operation, you must call the master from the service center, otherwise the guarantee for the boiler will not be open. Therefore, even if we do heating in a private house with our own hands, we cannot do without the help of specialists.
