Do-it-yourself air conditioner dismantling

Dismantling the air conditioner is necessary when moving to a new living space or changing the office, as well as for delivering faulty equipment to the workshop.

It might seem that dismantling the air conditioner with your own hands is not difficult. But the air conditioner removed ineptly sometimes cannot be restored. Do it yourself video of dismantling the air conditioner with us.

What is the danger of dismantling the air conditioner with your own hands?

  • Do-it-yourself air conditioner removalDuring the dismantling of the air conditioner with your own hands, air can enter the pipes. It starts the oxidation process, making further operation impossible;
  • The latches holding the unit on the mounting plate may be damaged;
  • Or release all refrigerant from the track. Then you have to refuel the air conditioner again, paying a considerable amount.

Why dismantle the air conditioner with your own hands?

Most users prefer to use the services of specialists. And this is the right decision.

But…

Sometimes you need to wait a few days before the arrival of the masters, but there is absolutely no time.

Sometimes there is simply no money for it. After all, the more powerful the air conditioner, the more expensive it is to dismantle it. And I’m so anxious to save a couple of thousand.

Therefore, we will step by step write: how to dismantle the air conditioner with our own hands.

How to dismantle your air conditioner

  • Before dismantling the air conditioner with our own hands, we start it in cooling mode;
  • On the outdoor module, we shut off the refrigerant supply valve. This valve is smaller, you have to resort to the help of a hexagon;
  • Leave the conditioner alone for 5 minutes so that the freon concentrates in the outdoor unit;
  • We screw the second valve on the outdoor unit and immediately turn off the air conditioner;
  • We check whether freon remains in the system: we press on the valve. If done correctly, there should be no hiss. Turn off the power;
  • And now you can disconnect the cold path between the modules outside and inside;
  • First, we dismantle the internal module, very carefully handling the latches on the mounting plate;
  • We put plugs on all open tubes so that they do not clog;
  • If the outdoor unit hangs high, you will have to attract a truck crane. In any case, it is very difficult. Therefore, you can not do without help.

A video of dismantling the air conditioner with your own hands clearly demonstrates the whole process and will not make a mistake.

Over a long period of storage of the removed conditioner, oxygen can enter the tubes. Therefore, if it is not planned to install it in the near future, you should call the masters, filling them with nitrogen and preserving.

Heating

Ventilation

Sewerage