For high-quality purification of tap water, it is desirable to use reliable filter systems. They allow you to neutralize suspended particles and dissolved impurities. As a reliable device, some users recommend the almost ideal Filos water filters. The lineup allows you to choose a device for performance. More recently, systems that have entered the market are gradually gaining popularity. Although there are negative, negative statements are not in favor of new items.
The principle of operation of the Fibos filters
To understand how the new filter works, it is important to know its device. One of the important working units of the device is a filter material in the form of a winding of very thin wire. The cross section of her thread is thinner than the diameter of a human hair. The distance between the wire fibers is only 0.001 mm (1 μm). The winding, in turn, is placed in a special flask made of durable glass.
Water passing through the filter leaves all impurities and particles on the existing winding. Sludge, dirt are subsequently washed off through a tap at the bottom of the glass bulb.
The filter is installed using flanges. The device simply crashes into the water supply at the entrance to the apartment or house.
The lineup
There are several modifications of Fibos filters on the market. All of them differ only in size and throughput (performance).
Fibos mini
The most compact of all types of filtering devices of the Fibos brand. It is intended, according to the manufacturer, for operation in cold and hot water. Case - corrosion resistant alloy. Specifications Fibos-mini:
- productivity of 300 liters per hour;
- allowable pressure in the system - 0.5-16 atm;
- cross-section of filtered impurities - from 1 micron;
- diameter of the crane for draining dirt - 1/2 inch;
- dimensions - 150x70 mm (HxW);
- maximum temperature of the passed water - +95 degrees.
This model is often bought in an apartment for a family of 2-3 people.
Fibos-1
The prefix "1" in the name of the device indicates its performance. The model is capable of passing up to 1 m3 of water per hour. Otherwise, the technical specifications from the manufacturer are as follows:
- dimensions - 190x100 mm (HxW);
- the temperature of the pumped water (max.) - +95 degrees;
- operating pressure range in the system - 0.5-16 atm .;
- particle size - from 0.001 mm;
- connectable allowable cross-sections from 1/2 to 3/4 inches.
More often this modification is acquired for borehole or well water in a private house.
Fibos-3
The model is capable of processing up to 3 m3 of water per hour. At the same time, its dimensions in width and height are 100x190 mm. Valid connection option is 3/4 to 1 inch. The operating pressure in the system for this model is from 0.5 to 16 atm. The diameter of the filtered particles is from 1 micron. As well as for other Fibos models this modification can work at hot water temperature up to + 95 °.
Industrial Fibos-60
This production model is often mounted on small industrial enterprises, apartment buildings or other commercial premises. Fibos-60 is able to pass through itself up to 60 m3 of water per hour. The dimensions of the flask are 300x850 mm in width and height. The permissible size of particles passed through a wire mesh is up to 1 micron. Connecting sections from 70 mm to 75 mm. The diameter of the tap for draining dirty sediments is 3/4 inch. The permissible temperature limit of hot water is +95 degrees.
Criterias of choice
Due to the fact that the form and installation principle of Fibos filters are repeated for all models, you need to choose a device solely by its performance.There are certain recommendations in this regard:
- For a small cottage, apartment, family up to three people, you can take a mini model.
- On a country house in which water is consumed not only for domestic needs but also for irrigation, you can buy a modification of Fibos-1.
- Fibos-3 is suitable for small commercial premises, cottages with pools.
- The industrial filter speaks for itself.
When choosing a filter, it is advisable to consider the type of water pollution. If these are suspended particles such as clay, ferric iron, the device is perfect. If dissolved salts and gases predominate in water, then Phybos will most likely not cope with them.
The manufacturer offers the buyer not just filters, but also entire systems for treating tap water, magnetic transducers, systems for automatic flushing.
Advantages and disadvantages of Fibos water filters
Despite the negative feedback from specialists about Fibos water filters, some users have identified a number of advantages for themselves:
- Well performs the function of rough cleaning.
- At the same time it works as a thin filtering device.
- Possibility of mounting the device on hot water and cold water.
- The spread in performance, which allows you to choose the right model without additional financial costs.
- Simple, intuitive installation and easy maintenance.
- Since the appliance is the main one, all the liquid entering the house is cleaned, including all household washing equipment and plumbing points.
Of the minuses, they are more often distinguished:
- Inconsistency with expectations. In most cases, the filter does not remove dissolved impurities and gases from the water.
- Quick wear of wire winding. In this case, the seller often offers to replace the filter under warranty.
- The need for frequent manual flushing of the device from accumulated dirt.
The price of Fibos water filters depends on their modification. The simplest mini model will cost the consumer about 10,000-12,000 rubles. Modification with the prefix "3" in the title will cost about 20,000 rubles. The industrial model has an approximate price of 550,000 rubles.
Reviews of specialists and consumers
Marina, 33 years old. Since I live alone with a child in a one-room apartment, it’s difficult for me to understand filter systems. However, I know that tap water does not flow at the best quality. In a light cup, it looks really yellow. I read about the available filter models. Chose Fibos-mini. A sales representative installed the device. It has been working for two months at the moment. I know for sure that the yellowness of the water has disappeared. I don’t understand how much it purifies water from other impurities.
Sasha, 29 years old. In the filter, Fibos-1 was completely disappointed. Having read the manufacturer’s recommendations first, and not having looked at the device reviews, I bought this model for a house with a well. Liquid from the source flows with an admixture of lime and hydrogen sulfide. I can say for sure that in the first month the suspended impurities became less. Gas is still here. The smell is present. After a month and a half of work, when draining, I found a worn wire winding. She just crumbled. I do not recommend it. Money wasted.
Yura 41 years old (plumber specialist, experience 12 years). Surely no one who thinks a bit understands that a simple wire winding cannot purify water, especially from dissolved impurities. It will work at maximum to remove suspended particles. In addition, under the pressure of water plus the onset of contamination, the wire wears out quickly. I saw it with my own eyes. If you need high-quality water purification for drinking, there is no better reverse osmosis system. Multistage filtration eliminates impurities of gases, bacteria and other. The same filter, which is hardly even called such, will not cope with any of the tasks set.
