We select the right boiler specifically for your requirements and further operating conditions, while not overpaying the extra money. Below are the top 7 best boilers for heating.
EVAN Warmos-IV-9.45
The Warmos-IV electric boiler with three power levels has an extended temperature range from +5 to + 85 ° C.
To maintain the previously set temperature, there is an automatic selection of the required number of power steps.
Has an LED control panel. Thanks to the bright indicators, the selected power level and boiler temperature are displayed.
When starting the boiler at negative temperatures, a special value of “-0” is provided. A blinking dot on the indicator displays the boiler control mode by temperature.
It has a maximum heat output of 9.45 kW with a heated area of 94.5 m². The placement method is wall-mounted. The optimum power level is automatically selected, but manual power control is available.
Warmos is protected against power surges and works great with high voltage (up to 260 V) or low voltage (up to 180 V). The desired temperature is set to the degree.
Buderus Logamax U072-12K
Buderus Logamax is presented as a double-circuit wall-mounted gas boiler. It is a modern, compact unit designed specifically for Russian operating conditions. The integrated plate heat exchanger has a wide range of modulations.
The kit supplied with the boiler consists of an expansion tank, a pump, a safety valve, and a flow sensor. And thanks to the compact size of the device, it can easily be installed even in the kitchen, pantry or bathroom.
The boiler has a simple and intuitive control, carried out with the help of five buttons, and the operation parameters are displayed on the LCD screen.
It copes with voltage fluctuations or changes in gas pressure perfectly; frost protection is additionally provided. And the body itself is equipped with thermal insulation, which protects the boiler from overheating.
The undeniable advantage of the model is its low noise level (<36 dBA).
Protherm Scat RAY 9 KE
It has a neat rectangular case, the front of which is equipped with a button control panel. Protherm Scat RAY 9 KE can be used both as the main and auxiliary heat source. The advanced design allows you to organically fit the boiler into any room, including the kitchen.
For convenience, various remote devices can be connected to the device, which will enable switching on and off, as well as changing power at a distance. This has become available due to the fact that new devices support the E-BUS protocol. The device has a maximum thermal power of 9 kW, comes with a built-in circulation pump and an expansion tank.
Protherm is distinguished from others by a self-diagnosis system, due to which the general condition of the device and the operability of its most important functions are constantly monitored, and error codes are displayed on the liquid crystal display when it is detected.
BAXI ECO-4s 24F
This boiler has a closed combustion chamber and a dual-circuit system. And thanks to the minimum amount of noise, it can be installed in any room.
It is distinguished by a solid assembly and the absence of breakdowns, thanks to separate heat exchangers that increase the reliability of the boiler. The main heat exchanger is copper, the second is made of stainless steel.
Equipped with a liquid crystal display for easy control. The temperature range is quite wide and can be adjusted from +30 to +85 degrees, with a maximum thermal power of 24 kW.
Comes with a built-in circulation pump, safety valve and air vent. Ultra-compact boiler is able to heat a large-sized country house.
This boiler is different from others:
- primary copper heat exchanger;
- convenient display;
- push-button control;
- the possibility of conversion for use on liquefied gas;
- pump post-circulation;
- frost protection.
Teplodar Kupper Practitioner 8
It is a practical option for heating rooms with an area of 80 square meters. It has a maximum heated power of 8 kW.
One of the advantages of this boiler is the ability to work with various heating systems, both open and closed. It is possible to use, not only as the main source of heat, but also as additional equipment with other coolants, including gas, electric and liquid fuel models.
Thanks to the compact dimensions of the device, the boiler can be installed even in rooms with a limited area. The upper part of the device is equipped with a supply pipe, which eliminates the possibility of airing. And additional heating of the air is provided by convection openings on the casing.
The set of this model includes: lacing, thermometer, poker and cast-iron grate
EVAN Next 7
This device is more suitable for private homes, cottages, small retail outlets and storage facilities. It can be used as a primary or backup heat source.
EVAN Next 7 is designed as a monoblock, which combines the control panel and the boiler itself. Thanks to the built-in thermostat, the temperature is regulated from 30 to 85 degrees. It has three stages of power control.
Safety is provided by automatic shutdown if the boiler reaches the set temperature. A self-resetting emergency thermal switch provides additional protection against overheating and is necessary in case of failure of the main temperature controller.
It is economical, easy to install and manage, as well as ergonomic due to its small size and wide technical characteristics. The low price and guaranteed reliability make the electric boiler a unique representative in its class.
It has a maximum heat output of 7 kW and is suitable for rooms of up to 70 m².
Electromash EVPM-6
This electric boiler is designed specifically for water heating of buildings with an open heating system.
Electromash EVPM-6 can be used both as the main source of heating and as an additional combining with other devices. Included with the boiler is a built-in control panel that allows you to adjust the temperature of the system.
There is also an emergency shutdown sensor, which prevents the coolant from overheating by timely turning off the heating elements.
Like many other models it has three power levels, it is able to heat a room of 44 m².
