The Siberia wood burning stove is an effective option for heating a utility room, cottage, warehouse, garage or small house. The user independently controls the duration of combustion and temperature using a gate or regulator on the sash. A feature of the devices is the complete combustion of fuel with a minimum ash residue.
Varieties of furnaces Siberia
The stove from the plant of NMK Siberia series is made with a solid steel case. The entire range of heating appliances is power-efficient and is classified according to the application.
Bath equipment
The range includes 7 devices made of steel 6 mm thick. The back wall is reinforced to 12 mm. Implemented systems of afterburning of pyrolysis gas, clean glass. In addition to firewood, a brown grade of coal can be laid in the Siberia sauna stove. Bath equipment is represented by modifications:
- Under the mounted tank. They are made with a chimney with a diameter of 400 mm, a depth of 750 mm, a width of 470 mm and a height of 780 mm. The maximum weight of stones is 60 kg. The heat exchanger can be integrated at the bottom of the housing. The heater takes up a lot of space, but is limited by the inclined part of the collector. There are special grooves for air circulation quality. Soot is easily removed due to the special design of the collector.
- With integrated metal reservoir. A 50 liter water tank is attached to the main body with a weld. The Siberia series sauna stove is manufactured with a furnace with a depth of 400 mm and a chimney branch displaced forward. The depth of the product itself is 1025 mm, width - 470 mm, height - 780 mm. The device is suitable if you have a steam room or sauna with a volume of 10 to 20 cubic meters.
- With a closed heater. The closed type of heater provides the comfort of being in the steam rooms due to the uniform multi-level heating of the stones. Models are produced with a firebox of 450 mm, a chimney of 115 mm in diameter, a depth of 817 mm, a width of 595 mm and a height of 1082 mm. They are distinguished by the power of the steam generator, the presence of an external fuel channel, ensuring a stable temperature in the steam room.
Modifications to the mounted tank and with closed heaters are compatible with gas burners.
Devices for space heating
The Siberia stove fireplace is installed on a summer residence, in a country or private house. You can lay firewood or special fuel briquettes in it. The manufacturer equipped the device with a gas afterburning system, due to which heat losses are reduced and the room heating rate is increased.
The series is represented by 4 models designed for heating rooms with a volume of 120-375 cubic meters. Their technical parameters can be viewed in table form.
| Technical specifications | Model | |||
| Siberia-8 | Siberia-10 | Siberia-12 | Siberia-15 | |
| power, kWt | 8 | 10 | 12 | 15 |
| Diameter of the chimney, mm | 115 | 150 | ||
| Weight, kg | 100 | 105 | 160 | 230 |
| Volume of premises, m3 | 120-200 | 150-250 | 200-300 | 250-375 |
The features of the Siberia brand fireplaces include:
- integrated panoramic glass with an air curtain system to protect against soot and high temperatures;
- ergonomics - firewood is compactly placed inside the firebox;
- long burning without losses.
Secondary gas afterburning increases the efficiency of fireplaces.
Solid fuel models
The BV series is represented by all-metal equipment with a natural convection system. Units are made of professional pipes in contact with the furnace compartment. They heat air flows from 60 to 150 degrees. The stove is equipped with two combustion chambers. At the bottom there is gasification, at the top - the burning of gases with the help of injection ignitors. Models "Burelyan" differ:
- the presence of two regulators - power (on the sash), gasification (on the flue pipe);
- the possibility of heating rooms from 100 to 600 cubic meters;
- compatibility only with solid fuels - wood, sawdust, cardboard, briquettes;
- high efficiency - from 8 to 12 hours work on one fuel tab;
- universality - it is allowed to use in a garage, a workshop, in a country house or in a private house.
The steel case is covered with a heat-resistant agent that polymerizes during the first flow. Paint emits a pungent odor.
Specifications
The parameters of the volume of rooms, power, weight, depth of the combustion chamber, the dimensions of the product and the diameter of the chimney are prescribed in the passport of the device. They differ depending on the series. When buying a furnace, the letter characteristic is also important:
- L - alloy steel was used for the production of the furnace compartment /
- K - device with convection mixed casing (stainless parts and components with heat-resistant enamel coating) /
- NZ - a mirror stainless steel was used for the convector casing /
- P - model with a steam generator.
By the name "Pro" you can judge the implementation of the body of steel with a thickness of 4 mm with 71% of chromium particles. The name "Panorama" indicates the presence of a sash with heat-resistant glazing.
Pros and cons
The manufacturer uses chromium-alloyed heat-resistant steel, which can replace cast iron material in terms of tightness characteristics, heating quality and linear expansion parameters. The line of furnace equipment Siberia has several advantages:
- strength of the body and other elements due to bolted, welded joints and sealing with heat-resistant cord;
- the heat capacity of the material and the heat resistance of the furnace even at high weight and temperature loads;
- aesthetic appearance - with massiveness, the units maintain a balance of shape and cladding;
- the possibility of using brown coal and peat briquettes as additional fuel;
- universality - used for space heating, installed in workshops, garages, saunas and baths;
- capacity and increased length of the furnace, where it is allowed to lay chopped logs;
- extensive model range - the heater can maintain a comfortable temperature in rooms with a volume of 40-720 m3.
Of the shortcomings of the heating equipment, users distinguish the high cost and the ability to install gas burners only in models with an extended remote firebox.
The principle of operation of furnaces Siberia
The complete instruction manual contains information on the installation and operation of the furnaces. The all-welded product features a simple and reliable design. A continuous series of heat exchanger tubes on the sides increases the heat transfer of the device.
Cold air masses arrive by the principle of natural convection into the openings of the lower heat exchangers. The return is carried out through the upper elements - the air is heated to 60-80 degrees. Warm flows are evenly distributed throughout the room, mixed with cold.
In a two-chamber furnace, wood is burned and the released gas is burned. The pyrolysis masses that appeared after smoldering firewood in the first firebox (bottom) are fed into the secondary firebox (top). There, gases are burned with the help of injectors.
The main combustion mode due to the gradual decay of solid fuel lasts from 8 to 10 hours continuously. The dividing wall of the chambers allows achieving a uniform temperature even at the ends of the heat exchangers.
Fuel is loaded through the sash, which is tightly closed by an eccentric lock. There is a blower regulator on the door - the user independently controls the burning rate. The transition to the afterburning mode is carried out by adjusting the damper in the chimney.An ash pan is used to protect against the loss of coals.
Fill the combustion chamber with round, long logs.
A brief overview of the main models of furnaces Siberia
In the manufacturer's lineup there are many devices for a bathhouse or a living room.
Siberia 7
Cast iron stove with heat-resistant sash. The chipper - cast-iron, at the same time performs the functions of a divider. There are upper and lower gates to adjust the temperature. The furnace is double, the device is equipped with afterburning systems and clean glass.
Features:
- power is 7 kW;
- Heats the room 125 cubic meters in volume;
- runs on fuel and briquette;
- door with heat resistant glass;
- fire chamber 200 mm deep.
The thickness of the walls of the fireplace is 10 mm.
Siberia 12
Model in a steel case with a metal convector cover. The inner surface of the firebox is decorated with fireclay tiles. The intensity of the air supply to the furnace compartment is adjustable. The fireplace option is equipped with a heat-resistant glass screen.
Features:
- power 12 kW;
- It is designed for heating rooms of 200-300 cubic meters in volume;
- furnace compartment with a depth of 400 mm;
- a chimney with a diameter of 150 mm is carried up;
- the width of the aggregate is 645 mm, the depth is 540 mm, the height is 1195 mm.
The ash pan of the Siberia 12 furnace is located in the form of a box behind the furnace door.
Katun
A stove for a bathhouse that heats a steam room and an adjacent room of 12-24 cubic meters. For the manufacture of the furnace and case, 5 mm thick steel was used. The furnace leaf is equipped with heat-resistant glass. A secondary gas afterburning system has been implemented.
Features:
- fuel material is not only firewood, but also brown coal;
- 200 kg of stone is placed in the net;
- the maximum length of logs in the depth of the furnace is 400 mm;
- external combustion channel.
The water tank can be put on the pipe.
Penny
The budget bathing model for steam rooms on 15 cubic meters. Suitable for baths with joint washing and steam room. Compatible with a 31 liter tank, stones weighing 60 kg are heated in 30 minutes to produce steam.
Features:
- the possibility of mounting in pairs from 6 cubic meters;
- a furnace with a depth of 400 mm is only compatible with firewood;
- open heater;
- the cusp is continuous, without glazing;
- the chimney 115 mm in diameter is brought up.
Due to the design, the stove can be heated from the steam room.
Siberia BV-480
Air-heating unit of 8 rectangular metal pipes. It is used for heating houses, workshops and workshops with a volume of 180 to 480 m3. Equipped with gas afterburning system. Large logs can be put in the stove; the fire door closes with an eccentric lock.
Features:
- fuel burning intensity is regulated;
- one bookmark of firewood is enough for 8-10 hours;
- device power - 18 kW;
- firebox with a depth of 590 mm with a maximum load of 95 l;
- pipe section for housing 80x40.
The device quickly heats the air and evenly distributes it throughout the room.
The Siberia range of heating appliances is characterized by reliability, heat transfer rate and rapid heating. The furnaces are mounted on a prepared foundation. Gas burner models are only connected after obtaining permission.
