For the continuous and uninterrupted operation of electric networks, it is required to correctly install, maintain, and repair them. The entire set of measures listed above forces specialists to use clips for wires of various configurations, sizes and materials of manufacture.
What are wire clips and how it works
A plastic clip or cable clamp is the second most popular simple part for mounting. The wire is firmly fixed and held thanks to the compressive action of the spring jaws. The wire clip is not intended to be used as a mounting suspension.
All configurations have identical design features, the main segment of the fastening is a screw, which provides reliable fixation. The assortment in construction stores is very extensive, you can also purchase clips for glue mounting.
Clips for electrical wiring have one main feature of use - compliance with strict compliance of the mounting hole with the diameter of the wire.
Each clip is designed exclusively for a single wire. If it is required to lay several cables, the fixing structures are installed with each other, and the contacting surfaces are equipped with a special system of protrusions.
The large mounting structure is used to fix thin-walled metal pipes as well as flexible cable channels. The diameter of wires, pipes, corrugations can reach 50 mm.
Popular types of clips for wires and cables
The use of a particular clamp is determined by a large number of criteria, for example, the purpose of the network, voltage and current, technical and operational parameters of the connections.
Clips with a clove
The main task of the part is to secure a cable or wire whose diameter varies between 6 - 14 mm. It is operated, as a rule, for the installation of lighting and power circuits, computer, network, as well as telephone lines.
They are made of wear-resistant and heat-resistant polypropylene, the working temperature of which is -5 - +140 degrees. The design is attached to the wall or any other surface with a nail, which is included in the kit. The component is made of hardened steel, length 4 - 12 mm.
Manufacturers declare that the part can be mounted to any surface except for metal.
Clamps for installing PVC pipes or corrugations
If the wiring is laid in a corrugation or a pipe made of polypropylene, it is recommended to use elastic clips made of plastic, they are also called latches.
They are produced by the method of molding plastic under the influence of high pressure. Equipped with stiffeners, due to which high grip strength of the corrugation or pipe is ensured. Operating temperature varies widely due to the use of high-quality plastic. The part is attached to the surface with a screw. The size range of clamps allows you to securely fix cables or wires with a diameter of 12 to 50 mm.
Decorative clips
According to the design characteristics, decorative clips are identical to the design with nails. However, the difference lies in additional equipment with an attractive part that reliably fixes the wire and disguises the wires passing along the wall.
Cable clip KL
The easiest way to mount.The design took the form of a clamp, make it from metal or plastic. Thanks to a wide variety of sizes, it is possible to reliably fix wires and cables of different sections. The diameter of the clip ranges from 5 to 20 mm. On the packaging and the product itself there is a marking type: KL-12, etc.
Dowel clamps
This variety is designed for fastening conductors of round or flat shape. With an open installation method, it is considered the least noticeable among analogues. They can also be used when installing hidden wiring in a strob. Using them is extremely simple. The disadvantages include low fixation strength.
Other fasteners
Some varieties of clips are not designed to hold electrical conductors.
Anchor clamps for mounting
These designs are designed to fix the wires, the cross section of which varies between 2 - 25 mm.kv., the number of cores is from 2 to 4 pieces.
The design is simple, it includes a housing made of polymer, equipped with a self-adjustable clamping wedge.
Anchor clips are divided into two types:
- for isolated neutral carrier;
- for self-supporting systems.
The anchor structure is easy to use thanks to its easy-to-operate bow Most often, this part is mounted on hooks, hooks and brackets for subsequent fixation on a solid surface of the electrical wiring.
Test Clips
Quite often in electronics and electrics test clamps are used. Such traditional accessories are considered to be gear sliding structures made of metal. The serrated part remains open, and the component intended for clamping is carefully insulated.
The simplest part is used for temporary engagement with wires, for example, for measuring mains voltage or current strength.
Test clamps are divided into two large types - for high-voltage electrical networks and low-voltage ones. The design parameters are identical, the only difference is the technical parameters for current.
Wire fastener
The technology for connecting wires with clips is extremely simple and straightforward. Implementation does not require special skills and a large list of required tools. You can do the work yourself without outside help.
- Mark the wall through which the wire will pass.
- Mark places for fasteners at equal distances.
- Fix the wire to the wall with the selected clips, usually with nails or screws.
When using dowel clamps, you need to thread the cable into the clip, insert the clip into the prepared hole in the wall and push it all the way. This method is only suitable for light wires.
